Introducing Art’s Way Small Manure Spreaders with Vertical Beaters

0

ARMSTRONG, IA/ACCESSWIRE/November 4, 2022/ Livestock producers of all sizes depend on Art’s Way Manufacturing Co., Inc. (NASDAQ: ARTW), equipment to perform the hard work that leads to a profitable operation for generations to come. That’s why our innovation isn’t always about bigger is better. The all-new X350 and X550 X Series manure spreaders are perfectly sized for livestock operations looking to haul their own manure while taking advantage of the superior spreading created by our unique vertical beater design.

Art’s-Way Manufacturing Co., Inc., Thursday, November 3, 2022, press release photo

Art's-Way Manufacturing Co., Inc., Thursday, November 3, 2022, press release photo

X550 Manure Spreader

“We used concepts from our larger models to create a smaller but efficient manure spreader,” said Bill Wegner, design engineer at Art’s Way. “I was SHOCKED at the performance these little machines gave us in testing.”

Features of Small Manure Spreaders

Operators know best what works for their operation. We listened to growers, collaborated with dealers and tested different features in the field to create the best value for our dealer network and farmers.

  1. Sizing and distribution of upper materials: our vertical beaters are only installed at an angle and under the ground. This picks up more material in the beaters to achieve an average sizing of less than 2 inches and creates and even spreads a pattern in the field. As a result, better nutrient uptake is achieved with smaller particles which increase yield possibilities.

  2. Go through the portals: The smallest unit is rated for 367 heaped cubic feet while the next size is rated for 551 heaped cubic feet. The range of 25 to 30 feet in overall length and 8.5 to 11 feet in overall width allows for easy maneuvering in and out of paddocks.

  3. Reliable protection: Peace of mind comes with the X-Series with its Limited Lifetime Apron Chain Warranty on the all-new 88C open-barrel hitch chain with tube-style slats. This plan will repair or replace any defective link or section at no cost to the original purchaser.

For more information, please visit artsway.com or contact an Art’s Way representative at 712.208.8467 or marketing@artsway.com.

Art's-Way Manufacturing Co., Inc., Thursday, November 3, 2022, press release photo

Art’s-Way Manufacturing Co., Inc., Thursday, November 3, 2022, press release photo

Contact:

David King, CEO
712.208.8467 ext. 200
davidk@artsway.com
www.artsway.com

Art's-Way Manufacturing Co., Inc., Thursday, November 3, 2022, press release photo

Art’s-Way Manufacturing Co., Inc., Thursday, November 3, 2022, press release photo

About Art’s Way

Art’s Way Manufacturing is a small, publicly traded company specializing in the manufacture of equipment. For more than 50 years, it has been committed to designing and building high quality machines for all operations. It has approximately 200 employees in three branches: Art’s Way Manufacturing in Armstrong, Iowa, Art’s Way Scientific in Monona, Iowa, and American Carbide Tool in Canton, Ohio. Art’s Way manure spreaders, forages, high dump carts, bale processors, motor graders, land planes, sugar beet harvesters and grinder mixers are designed to optimize production, increase efficiency and meet growing customer demands.

THE SOURCE: Art’s-Way Manufacturing Co., Inc.

See the source version on accesswire.com:
https://www.accesswire.com/723866/Introducing-Small-Manure-Spreaders-with-Vertical-Beaters-from-Arts-Way

Share.

Comments are closed.